Aluminium ute canopy makers
Submitted: Thursday, Oct 17, 2019 at 19:45
ThreadID:
139204
Views:
7495
Replies:
9
FollowUps:
6
This Thread has been Archived
workhorse
Im in the market for a new aluminium canopy to go on my tray top and am having difficulty in finding any manufacturers that people have used and can recommend.
Any suggestions as to who fellow off roaders have used would be appreciated.
I will fit it out myself.
Many thanks
Reply By: rumpig - Thursday, Oct 17, 2019 at 20:13
Thursday, Oct 17, 2019 at 20:13
Happy with my Spinifex Canopy.... maybe throwing up your location would help unless you are happy to travel to get it.
AnswerID:
628187
Follow Up By: workhorse - Thursday, Oct 17, 2019 at 20:31
Thursday, Oct 17, 2019 at 20:31
Oops. Good idea. I'm on the mid North coast of NSW but happy to travel 500km or so.
Looking for a smooth skin,not checker plate one.
Thanks
FollowupID:
902488
Follow Up By: rumpig - Friday, Oct 18, 2019 at 10:27
Friday, Oct 18, 2019 at 10:27
I think they also do smooth skin canopies, but best to
check with them....had no dust ingress issues on
mine after plenty of outback dirt roads. It’s the same canopy company that is used in The Offroad Adventure Show, and I was told by someone involved with them that they’ve made comment about how impressed they were with theirs keeping the dust out
FollowupID:
902496
Reply By: Member - Supersi - Thursday, Oct 17, 2019 at 20:44
Thursday, Oct 17, 2019 at 20:44
Budget range would also help.
I’ve got a Concept Canopy, made in
Brisbane. Really
well built and dust proof but not cheap.
http://conceptcanopies.com.au/
AnswerID:
628188
Follow Up By: Parafan - Friday, Oct 18, 2019 at 08:44
Friday, Oct 18, 2019 at 08:44
I also have a Concept Canopy. Have had it for nearly 10 years and no problems. These canopies were the ones used by All 4 Adventure until recently.
Well built and their use of extrusions make the fitout easy.
FollowupID:
902493
Follow Up By: Member - McLaren3030 - Friday, Oct 18, 2019 at 15:07
Friday, Oct 18, 2019 at 15:07
Parafan,
All 4 Adventures uses Norweld Canopies, and have done for at least the last 3 years.
Macca.
FollowupID:
902499
Follow Up By: Parafan - Friday, Oct 18, 2019 at 17:10
Friday, Oct 18, 2019 at 17:10
Correct but they were using the Concept before. Maybe I should not have said "recently" but just trying to give the poster an idea of quality
FollowupID:
902503
Reply By: Batt's - Friday, Oct 18, 2019 at 02:12
Friday, Oct 18, 2019 at 02:12
If you change you mind, want checker plate MRT - mates rates
tools sell them I've had
mine for approx 5yrs they're are not expesive and are very good.
AnswerID:
628189
Reply By: Frank P (NSW) - Friday, Oct 18, 2019 at 07:37
Friday, Oct 18, 2019 at 07:37
CSM in Dara,
Brisbane. Expensive but faultless.
AnswerID:
628191
Reply By: Bob Y. - Qld - Friday, Oct 18, 2019 at 07:37
Friday, Oct 18, 2019 at 07:37
I’ve got 2 canopies made by Dynamic Engineering & Fabrication, of
Hervey Bay Qld.
One checker plate, the other mill finish but painted white. Excellent workmanship, and strong. Have a look
here
Slice on Camper
Bob
AnswerID:
628192
Reply By: Member - McLaren3030 - Friday, Oct 18, 2019 at 08:10
Friday, Oct 18, 2019 at 08:10
Have a look at Norweld in Brisbane/Sunshine Coast, expensive, but very
well built.
Macca.
AnswerID:
628194
Follow Up By: workhorse - Friday, Oct 18, 2019 at 08:12
Friday, Oct 18, 2019 at 08:12
Thanks for all of the replies. It seems sunny Qld has a grip on canopy makers??
FollowupID:
902491
Reply By: Sir Kev - Friday, Oct 18, 2019 at 19:32
Friday, Oct 18, 2019 at 19:32
I have one from Ally Arc in
Toowoomba. Made to my specs and thus far no issues, have had it about 5 years now. He also made my current Alloy tray and also dog crate. Happy to think outside of the box.
Cheers Kev
| Russell Coight:
He was presented with a difficult decision: push on into the stretching deserts, or return home to his wife.Lifetime Member
My Profile My Blog Send Message |
AnswerID:
628209
Reply By: Member - John T (Tamworth NSW) - Monday, Oct 21, 2019 at 17:22
Monday, Oct 21, 2019 at 17:22
G’day workhorse. Try a call to Obeico Industries In
Tamworth and ask for Serge. Have used their canopies for over 20 years and can not fault them. Expensive but like most things “you gets what you pay for”.
Cheers
| John T (Lifetime Member)
VKS-737 Mobile 2619
Selcall 2619
"Argue for your limitations and sure enough they're yours" - Richard Bach in "Illusions" Lifetime Member
My Profile My Blog My Position Send Message |
AnswerID:
628245
Reply By: Baz - The Landy - Tuesday, Oct 22, 2019 at 16:45
Tuesday, Oct 22, 2019 at 16:45
I’ve had two made by Dave Vella at Dave’s Metal Products at Wetherill Park in
Sydney.
Quality product and not the cheapest, but expertly crafted.
Cheers, Baz - The Landy
AnswerID:
628267